Re: Spread does not seem to be running
Posted: Tue Oct 29, 2013 6:59 am
Spread does not seem to be running on 192.168.0.6. The database will not be started on this host.
Spread does not seem to be running on 192.168.0.4. The database will not be started on this host.
Spread does not seem to be running on 192.168.0.5. The database will not be started on this host.
Ok, removed subnet assigned new ip addresses, created VIP and reinstalled with the -S parameter. Here is the new /opt/vertica/config/vspread.conf. Same issue:
Spread_Segment 192.168.0.4:4803 {
N192168000004 192.168.0.4 {
192.168.0.4
127.0.0.1
}
}
Spread_Segment 192.168.0.5:4803 {
N192168000005 192.168.0.5 {
192.168.0.5
127.0.0.1
}
}
Spread_Segment 192.168.0.6:4803 {
N192168000006 192.168.0.6 {
192.168.0.6
127.0.0.1
}
}
EventLogFile = /dev/null
EventTimeStamp = "[%a %d %b %Y %H:%M:%S]"
DaemonUser = spread
DaemonGroup = verticadba
DebugFlags = { EXIT }
Spread does not seem to be running on 192.168.0.4. The database will not be started on this host.
Spread does not seem to be running on 192.168.0.5. The database will not be started on this host.
Ok, removed subnet assigned new ip addresses, created VIP and reinstalled with the -S parameter. Here is the new /opt/vertica/config/vspread.conf. Same issue:
Spread_Segment 192.168.0.4:4803 {
N192168000004 192.168.0.4 {
192.168.0.4
127.0.0.1
}
}
Spread_Segment 192.168.0.5:4803 {
N192168000005 192.168.0.5 {
192.168.0.5
127.0.0.1
}
}
Spread_Segment 192.168.0.6:4803 {
N192168000006 192.168.0.6 {
192.168.0.6
127.0.0.1
}
}
EventLogFile = /dev/null
EventTimeStamp = "[%a %d %b %Y %H:%M:%S]"
DaemonUser = spread
DaemonGroup = verticadba
DebugFlags = { EXIT }