Spread does not seem to be running

Moderator: NorbertKrupa

chad
Newbie
Newbie
Posts: 10
Joined: Wed Oct 16, 2013 2:00 am

Spread does not seem to be running

Post by chad » Thu Oct 24, 2013 3:59 am

*** Creating database: EFDemo2 ***
10.10.100.6 OK [vertica][(6, 1, 3)][000][x86_64]
10.10.100.5 OK [vertica][(6, 1, 3)][000][x86_64]
10.10.100.4 OK [vertica][(6, 1, 3)][000][x86_64]
Checking full connectivity
Creating database EFDemo2
Spread does not seem to be running on 10.10.100.6. The database will not be started on this host.
Spread does not seem to be running on 10.10.100.4. The database will not be started on this host.
Spread does not seem to be running on 10.10.100.5. The database will not be started on this host.

The following host(s) are not available: 10.10.100.6 , 10.10.100.4 , 10.10.100.5.
You should get them running first. Operation can not be completed.


So I went and restarted spread on all nodes:
[root@vertica2 ~]# /etc/init.d/spreadd restart
Stopping spread daemon: [ OK ]

Starting spread daemon: spread (pid 1969) is running...
[ OK ]

Can someone assist with this?

I am simply attempting to create a Database for a POC

User avatar
JimKnicely
Site Admin
Site Admin
Posts: 1778
Joined: Sat Jan 21, 2012 4:58 am
Contact:

Re: Spread does not seem to be running

Post by JimKnicely » Thu Oct 24, 2013 2:33 pm

Hi!

Can you post the contents of the /opt/vertica/config/vspread.conf and /opt/vertica/log/spread_<host>.log files?

Also, what is the output of the following Linux command?
  • chkconfig --list ntpd
Did you disable the Linux firewall on all hosts?
Jim Knicely

Image

Note: I work for HPE. My views, opinions, and thoughts expressed here do not represent those of my employer.

chad
Newbie
Newbie
Posts: 10
Joined: Wed Oct 16, 2013 2:00 am

Re: Spread does not seem to be running

Post by chad » Mon Oct 28, 2013 9:18 am

/opt/vertica/config/vspread.conf

Spread_Segment 10.10.100.255:4803 {
N010010100004 10.10.100.4 {
10.10.100.4
127.0.0.1
}
N010010100005 10.10.100.5 {
10.10.100.5
127.0.0.1
}
N010010100006 10.10.100.6 {
10.10.100.6
127.0.0.1
}
}
EventLogFile = /dev/null
EventTimeStamp = "[%a %d %b %Y %H:%M:%S]"
DaemonUser = spread
DaemonGroup = verticadba
DebugFlags = { EXIT }


There arent any /opt/vertica/log/spread_<host>.log files on any of the hosts.
[root@vertica2 ~]# cd /opt/vertica/log/
[root@vertica2 log]# ls
adminTools-dbadmin.errors agent.log
adminTools-dbadmin.log agent.pid
agent_dbadmin.err agentStdMsg.log
agent_dbadmin.log hashlib-20081119-py2.7-linux-x86_64.egg-tmp

On all three hosts, the chkconfig --list ntpd shows:

ntpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off

chad
Newbie
Newbie
Posts: 10
Joined: Wed Oct 16, 2013 2:00 am

Re: Spread does not seem to be running

Post by chad » Mon Oct 28, 2013 9:21 am

Oh yeah firewall is off on all three hosts using:
service iptables save
service iptables off
chkconfig iptables off

id10t
GURU
GURU
Posts: 732
Joined: Mon Apr 16, 2012 2:44 pm

Re: Spread does not seem to be running

Post by id10t » Mon Oct 28, 2013 9:35 am

Hi!

[DELETED]
Last edited by id10t on Sat May 09, 2015 3:30 pm, edited 1 time in total.

chad
Newbie
Newbie
Posts: 10
Joined: Wed Oct 16, 2013 2:00 am

Re: Spread does not seem to be running

Post by chad » Mon Oct 28, 2013 11:25 am

Thanks, spread does not work in a subnet?

id10t
GURU
GURU
Posts: 732
Joined: Mon Apr 16, 2012 2:44 pm

Re: Spread does not seem to be running

Post by id10t » Mon Oct 28, 2013 12:29 pm

Hi!

[DELETED]
Last edited by id10t on Sat May 09, 2015 3:29 pm, edited 1 time in total.

Post Reply

Return to “Vertica Error Codes”