I am using Vertica community edition 7.2.3 and am setting up a 3-node cluster on AWS VPC.
My install_vertica script runs fine. While creating the database, the node from where i am issuing the command via adminTools comes up but rest of the two nodes stay down.
Code: Select all
Node Status: v_mpp_test_node0001: (DOWN) v_mpp_test_node0002: (UP) v_mpp_test_node0003: (DOWN)
There exists an password less ssh between the 3-servers.
following is the netstat output:
Code: Select all
[root@ip-10-0-3-xxx ec2-user]# netstat -an | egrep 'tcp|udp'
tcp 0 0 10.0.2.185:4803 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:5444 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:36582 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:5433 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:5434 0.0.0.0:* LISTEN
tcp 0 0 10.0.2.185:22 10.0.200.5:53124 ESTABLISHED
tcp 0 0 10.0.2.185:5434 10.0.2.185:36504 ESTABLISHED
tcp 0 0 10.0.2.185:36504 10.0.2.185:5434 ESTABLISHED
tcp 0 0 :::111 :::* LISTEN
tcp 0 0 :::22 :::* LISTEN
tcp 0 0 ::1:631 :::* LISTEN
tcp 0 0 :::5433 :::* LISTEN
tcp 0 0 ::1:25 :::* LISTEN
udp 0 0 0.0.0.0:111 0.0.0.0:*
udp 0 0 0.0.0.0:631 0.0.0.0:*
udp 0 0 10.0.2.185:123 0.0.0.0:*
udp 0 0 127.0.0.1:123 0.0.0.0:*
udp 0 0 0.0.0.0:123 0.0.0.0:*
udp 0 0 0.0.0.0:33666 0.0.0.0:*
udp 0 0 0.0.0.0:935 0.0.0.0:*
udp 0 0 10.0.2.185:5433 0.0.0.0:*
udp 0 0 10.0.2.185:4803 0.0.0.0:*
udp 0 0 10.0.2.185:4804 0.0.0.0:*
udp 0 0 0.0.0.0:68 0.0.0.0:*
udp 0 0 0.0.0.0:42327 0.0.0.0:*
udp 0 0 :::111 :::*
udp 0 0 fe80::8bf:7fff:fe9f:bd1b:123 :::*
udp 0 0 ::1:123 :::*
udp 0 0 :::123 :::*
udp 0 0 :::935 :::*
Code: Select all
[root@ip-10-0-2-185 ec2-user]# nc -vz -u 10.0.2.186 4803
Connection to 10.0.2.186 4803 port [udp/notateit-disc] succeeded!
[root@ip-10-0-2-185 ec2-user]# nc -vz -u 10.0.2.184 4803
Connection to 10.0.2.184 4803 port [udp/notateit-disc] succeeded!
Code: Select all
[dbadmin@ip-10-0-2-184 ~]$/opt/vertica/bin/vnetperf
2016-08-02_13:10:28,619 ERROR: [Connector Thread 10.0.2.186 0x7fe59578e700] Couldn't connect to 10.0.2.186 (family 2, attempt 0): Connection timed out; errno=110 (Connection timed out)
2016-08-02_13:10:28,619 ERROR: [Connector Thread 10.0.2.185 0x7fe59618f700] Couldn't connect to 10.0.2.185 (family 2, attempt 0): Connection timed out; errno=110 (Connection timed out)
2016-08-02_13:11:32,619 ERROR: [Connector Thread 10.0.2.186 0x7fe59578e700] Couldn't connect to 10.0.2.186 (family 2, attempt 1): Connection timed out; errno=110 (Connection timed out)
2016-08-02_13:11:32,619 ERROR: [Connector Thread 10.0.2.185 0x7fe59618f700] Couldn't connect to 10.0.2.185 (family 2, attempt 1): Connection timed out; errno=110 (Connection timed out)
2016-08-02_13:12:36,619 ERROR: [Connector Thread 10.0.2.186 0x7fe59578e700] Couldn't connect to 10.0.2.186 (family 2, attempt 2): Connection timed out; errno=110 (Connection timed out)
2016-08-02_13:12:36,619 ERROR: [Connector Thread 10.0.2.185 0x7fe59618f700] Couldn't connect to 10.0.2.185 (family 2, attempt 2): Connection timed out; errno=110 (Connection timed out)
2016-08-02_13:12:37,619 ERROR: [Connector Thread 10.0.2.186 0x7fe59578e700] Could not find anything to connect to for 10.0.2.186; errno=110 (Connection timed out)
2016-08-02_13:12:37,619 ERROR: [Connector Thread 10.0.2.185 0x7fe59618f700] Could not find anything to connect to for 10.0.2.185; errno=110 (Connection timed out)
2016-08-02_13:12:37,619 ERROR: [main 0x7fe596b92720] Caught error: Unable to connect to host 10.0.2.185:14159
Unable to connect to host 10.0.2.186:14159; errno=0 (Success)
Do i also have to open port 14159 specifically? Am i making some obvious mistake?
Please do let me know if you need any other specific information.