Vertica 3 node installation is done. I am able to move from one node to another by SSH with out password,
While creating database from admintools I am facing the following problem
*** Creating database: mam ***
10.4.111.218 OK [vertica][(6, 0, 0)][000][x86_64]
10.4.218.65 OK [vertica][(6, 0, 0)][000][x86_64]
10.4.217.188 OK [vertica][(6, 0, 0)][000][x86_64]
Checking full connectivity
Creating database mam
Node Status: v_mam_node0003: (DOWN)
Node Status: v_mam_node0003: (INITIALIZING)
Node Status: v_mam_node0003: (VALIDATING LICENSE)
Node Status: v_mam_node0003: (UP)
Creating database nodes
Creating node v_mam_node0001 (host 10.4.111.218)
Creating node v_mam_node0002 (host 10.4.218.65)
Node Status: v_mam_node0001: (DOWN) v_mam_node0002: (DOWN) v_mam_node0003: (UP)
Node Status: v_mam_node0001: (DOWN) v_mam_node0002: (DOWN) v_mam_node0003: (UP)
Node Status: v_mam_node0001: (DOWN) v_mam_node0002: (DOWN) v_mam_node0003: (UP)
Node Status: v_mam_node0001: (DOWN) v_mam_node0002: (DOWN) v_mam_node0003: (UP)
Node Status: v_mam_node0001: (DOWN) v_mam_node0002: (DOWN) v_mam_node0003: (UP)
Node Status: v_mam_node0001: (DOWN) v_mam_node0002: (DOWN) v_mam_node0003: (UP)
Node Status: v_mam_node0001: (DOWN) v_mam_node0002: (DOWN) v_mam_node0003: (UP)
Node Status: v_mam_node0001: (DOWN) v_mam_node0002: (DOWN) v_mam_node0003: (UP)
Node Status: v_mam_node0001: (DOWN) v_mam_node0002: (DOWN) v_mam_node0003: (UP)
Node Status: v_mam_node0001: (DOWN) v_mam_node0002: (DOWN) v_mam_node0003: (UP)
Nodes UP: v_mam_node0003
Nodes DOWN: v_mam_node0001, v_mam_node0002 (may be still initializing).
It is suggested that you continue waiting.
Do you want to continue waiting? (yes/no) [yes] yes
I have tried couple of times, but mostly the node status is down for all 3 nodes. DBLog in every node states "connected to spread in port XXXX"
Can any one of you throw some light on this ?
Fresh Installation - Problem in Creating Database
Moderator: NorbertKrupa
-
- Newbie
- Posts: 5
- Joined: Thu Apr 18, 2013 9:15 am
Re: Fresh Installation - Problem in Creating Database
Hi!
Check vertica.log, not a spread. If, for example, some container was deleted on node (from any reason), so node will not up.
Check vertica.log, not a spread. If, for example, some container was deleted on node (from any reason), so node will not up.
Re: Fresh Installation - Problem in Creating Database
Hey imsaravanan79,
If I were you I'd answer "yes" to the question about continuing to wait several more times. There have been times where I had to answer yes 5 times!
If I were you I'd answer "yes" to the question about continuing to wait several more times. There have been times where I had to answer yes 5 times!
Thanks,
Juliette
Juliette
-
- Newbie
- Posts: 5
- Joined: Thu Apr 18, 2013 9:15 am
Re: Fresh Installation - Problem in Creating Database
thanks but i have waited 10 rounds. I captured the screen shot the first time
-
- Newbie
- Posts: 5
- Joined: Thu Apr 18, 2013 9:15 am
Re: Fresh Installation - Problem in Creating Database
i got half baked database. i could not find vertica.log in the catalog folder.
Some time no nodes are up. Not able to figure out the cause. can any one help me out ?. The database is not created.
Some time no nodes are up. Not able to figure out the cause. can any one help me out ?. The database is not created.
- JimKnicely
- Site Admin
- Posts: 1825
- Joined: Sat Jan 21, 2012 4:58 am
- Contact:
Re: Fresh Installation - Problem in Creating Database
Hi,
Can you attach a dbLog file from nodes 2 and 3 and your vertica.log file from nodes 2 and 3 so that we can take a look?
Can you attach a dbLog file from nodes 2 and 3 and your vertica.log file from nodes 2 and 3 so that we can take a look?
Jim Knicely
Note: I work for Vertica. My views, opinions, and thoughts expressed here do not represent those of my employer.
Note: I work for Vertica. My views, opinions, and thoughts expressed here do not represent those of my employer.
-
- Newbie
- Posts: 5
- Joined: Thu Apr 18, 2013 9:15 am
Re: Fresh Installation - Problem in Creating Database
Sorry for the delay, bit struck with bringing the log files.
i have attached new set of responses from vertica during database creation. This time also i got only one node up and rest 2 nodes were down. This time i have waited 4 rounds
please find attached the success node (node6-log) and the remaining log files which are not successful.
can any one help on this.
*** Creating database: mam ***
10.4.111.218 OK [vertica][(6, 0, 0)][000][x86_64]
10.4.218.65 OK [vertica][(6, 0, 0)][000][x86_64]
10.4.217.188 OK [vertica][(6, 0, 0)][000][x86_64]
Checking full connectivity
Creating database mam
Node Status: v_mam_node0006: (DOWN)
Node Status: v_mam_node0006: (INITIALIZING)
Node Status: v_mam_node0006: (VALIDATING LICENSE)
Node Status: v_mam_node0006: (UP)
Creating database nodes
Creating node v_mam_node0004 (host 10.4.111.218)
Creating node v_mam_node0005 (host 10.4.218.65)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node000 6: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node000 6: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node000 6: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Nodes UP: v_mam_node0006
Nodes DOWN: v_mam_node0004, v_mam_node0005 (may be still initializing).
It is suggested that you continue waiting.
Do you want to continue waiting? (yes/no) [yes]
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Nodes UP: v_mam_node0006
Nodes DOWN: v_mam_node0004, v_mam_node0005 (may be still initializing).
It is suggested that you continue waiting.
Do you want to continue waiting? (yes/no) [yes]
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
i have attached new set of responses from vertica during database creation. This time also i got only one node up and rest 2 nodes were down. This time i have waited 4 rounds
please find attached the success node (node6-log) and the remaining log files which are not successful.
can any one help on this.
*** Creating database: mam ***
10.4.111.218 OK [vertica][(6, 0, 0)][000][x86_64]
10.4.218.65 OK [vertica][(6, 0, 0)][000][x86_64]
10.4.217.188 OK [vertica][(6, 0, 0)][000][x86_64]
Checking full connectivity
Creating database mam
Node Status: v_mam_node0006: (DOWN)
Node Status: v_mam_node0006: (INITIALIZING)
Node Status: v_mam_node0006: (VALIDATING LICENSE)
Node Status: v_mam_node0006: (UP)
Creating database nodes
Creating node v_mam_node0004 (host 10.4.111.218)
Creating node v_mam_node0005 (host 10.4.218.65)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node000 6: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node000 6: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node000 6: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Nodes UP: v_mam_node0006
Nodes DOWN: v_mam_node0004, v_mam_node0005 (may be still initializing).
It is suggested that you continue waiting.
Do you want to continue waiting? (yes/no) [yes]
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Nodes UP: v_mam_node0006
Nodes DOWN: v_mam_node0004, v_mam_node0005 (may be still initializing).
It is suggested that you continue waiting.
Do you want to continue waiting? (yes/no) [yes]
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
Node Status: v_mam_node0004: (DOWN) v_mam_node0005: (DOWN) v_mam_node0006: (UP)
- Attachments
-
- node6-log.log
- (55.48 KiB) Downloaded 714 times
-
- node4-log.log
- (209.85 KiB) Downloaded 614 times
-
- node5-log.log
- (185.2 KiB) Downloaded 609 times